Fujitsu P24W-6 LED Operating Manual page 31

Setting functions
Input select
Language
DDC-CI
OSDTimeout
Factory recall
Displaying information
Fujitsu Technology Solutions
Call up the Setup settings window
Select the input signal
This function is used to select the input signal (VGA, DVI or DP).
This is on condition that the display adapter supports this function.
Set the language for the OSD menu
With this function you select the language for the OSD menu.
The default setting is English.
Activates/deactivates the DDC-CI function
On = The DDC-CI function is activated (default setting)
Off = The DDC-CI function is deactivated
Set the display duration of the OSD menu
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is
automatically faded out.
Activate the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
The function is executed with the
cable, an Auto Processing message is displayed. The language selection
menu appears.
Call the Information setting window
The model designation, serial number, resolution, H/V frequency, and ECO
mode are displayed with this function.
button. If you are using a VGA data
Operation
27