Connecting To A Tv Using An Hdmi (Digital) Cable; Tv Soundconnect - Samsung HW-JM6000C User Manual

CONNECTIONS

CONNECTING TO A TV USING AN HDMI (DIGITAL) CABLE

1. Connect an HDMI cable from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI IN
jack on your TV.
2. Press the (Source) button on the top panel of the Soundbar or the SOURCE button on the remote
control to select the D.IN mode.
● HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
● If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 0.55 inches.
● Anynet+ must be turned on.
● This function is not available if the HDMI cable does not support ARC.

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
1. Turn on the TV and Soundbar.
•
Open the menu of the TV.
•
Navigate to Speaker Settings on the Sound tab.
•
Set the "Add New Device" menu to "On".
2. Press the (Source) button on the main unit's top panel or the SOURCE button on the remote control
to select the TV mode.
3. On the TV, a message asking whether to enable the TV SoundConnect function appears.
4. Select <Yes> using the TV's remote control to finish connecting the TV and Soundbar.
HDMI Cable
HDMI IN
DC 14V
Connect
HDMI OUT
(TV-ARC)
HDMI OUT
(TV-ARC)
HDMI IN
AUX IN 5V 0.5A
HDMI OUT
OPTICAL IN (TV-ARC)
18