Channel List Copy - Philips 32PHS5302 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Rename channels

You can rename channels in the channel list.

1 - Select the channel you want to rename in one of

the channel lists - All, Favourites, Radio or New.



2 - Press

Rename . You can enter text with the

remote control keyboard or open the on-screen

keyboard.

With the on-screen keyboard

• To open the on-screen keyboard, place the cursor in

the name text field and press OK.

• To delete the character in front of the cursor,



press

Backspace .

• To enter a character, select the character with the

arrow keys and press OK.

• To select uppercase letters, press

• To select numbers or special characters, press

• When you are ready, press  BACK to close the

on-screen keyboard.

• To finish renaming, select Done and press OK.

Homing transponder and LNB

In some countries, you can adjust the expert settings

for homing transponder and each LNB. Only use or

change these settings when a normal installation fails.

If you have non-standard satellite equipment, you

can use these settings to overrule the standard

settings. Some providers might give you some

transponder or LNB valeus which you can enter here.

LNB Power

By default, LNB Power is set to On.

22 kHz Tone

By default, the Tone is set to Auto.

Low LO Frequency / High LO Frequency

The local oscillator frequencies are set to standard

values. Adjust the values only in case of exceptional

equipment that needs different values.

Problems

The TV cannot find the satellites I want or the TV

installs the same satellite twice

• Make sure that the correct number of satellites is set

in Settings at the start of the installation. You can set

the TV to search for One, Two or 3/4 satellites.

A dual head LNB cannot find a second satellite

• If the TV finds one satellite but cannot find a second

one, turn the dish a few degrees. Align the dish to get

the strongest signal on the first satellite. Check the

signal strength indicator of the first satellite on screen.



With the first satellite set at the strongest signal, select

Search again to find the second satellite.

• Make sure the settings are set to Two Satellites.

Changing the installation settings did not solve my

problem

• All settings, satellites and channels are only stored

at the end of the installation when you finish.

All satellite channels are gone

• If you use a Unicable system, make sure you

assigned two unique user band numbers for both

built-in tuners in the Unicable settings. It might be

that another satellite receiver in your Unicable system

is using the same user band number.

Some satellite channels seem to have disappeared

from the channel list

• If some channels seem to be gone or displaced, the

broadcaster might have changed the transponder

location of these channels. To restore the channel

positions in the channel list, you can try an update of

the channel package.

I cannot remove a satellite

• Subscription packages do not allow removing a

satellite. To remove the satellite, you have to do a

complete installation again and select another

package.

Sometimes the reception is poor

• Check if the satellite dish is solidly mounted. Strong

winds can move the dish.

• Snow and rain can degrade the reception.

19.3