Table of Contents
Advertisement
OPERATIONS
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
BEFORE SETTING THE TEMPERATURE (FOR DOOR COOLING MODEL)
●
The temperature of the refrigerator is kept constant regardless of changes in room temperature.
It is recommended that, once set, the temperature settings (the controls for the refrigerator and
freezer compartments) not be changed unless necessary.
●
This refrigerator has one temperature control button for the refrigerator compartment and one
temperature control dial for the freezer compartment.
●
The default setting of the temperature control button for the refrigerator compartment is '3°C'.
●
The default setting of the temperature control dial for the freezer compartment is '5'.
●
This refrigerator has a temperature sensor in the refrigerator compartment. It will start and stop the
compressor automatically as needed.
SELF TEST (FOR DOOR COOLING MODEL)
●
Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas, it will
display an error code to assist the repair technician. While an error code is displayed, other control and
display functions will not operate.
●
If an error code is displayed, contact a service center. Do not disconnect the power cord from the outlet.
DOOR ALARM (FOR DOOR COOLING MODEL)
When the door of the refrigerator is open for 1 minute, an alarm will sound three. It the door remains open,
the alarm will repeat every 30 seconds.
CONTROLS FOR REFRIGERATOR COMPARTMENT
FOR NON DOOR COOLING MODEL
Ref. Temp Control Button
FOR DOOR COOLING MODEL
●
Press 'REFRIGERATOR' button to control refrigerator
temperature.
●
Whenever pressing the button, the LED emits light.
●
The number showing up on the LED luminesce indicate
the temperature of refrigerator compartment.
●
You can select the desired setting point seven steps, from
'0°C' to '6°C'.
The default setting of the temperature control button for
the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the Ref.
Temp Control button.
When the button is pressed, the LEDs light.
The temperature is set in 5 steps, from MIN to MAX
cooling.(MIN = warmest, MAX = coldest temperature.)
12
Advertisement
Table of Contents
