Table of Contents
Advertisement
My water hardness:
Below is an example of detergent
dosages on a packaging label:
Degree of
soiling →
Water
hardness ↓
soft/medium
55 ml 75 ml 120
hard/very hard 75 ml 95 ml 150
The default setting for the basic dosage
is set specifically according to the area
in which you live (e.g. 75 ml for
detergent and 36 ml for fabric softener).
Set the basic detergent dosage
according to the detergent's packaging
label. Take your water hardness into
consideration when doing so.
Select the basic fabric softener dosage
according to how soft you would like
your laundry to be.
Changing one basic dosage affects all
three dosage quantities in the same
way.
Notes
Reduce the basic dosage if using a
■
very concentrated detergent.
160
ml
ml
180
ml
ml
Intelligent dosing system
If large amounts of foam are
■
repeatedly created during washing,
please check your basic dosage and
dosage quantity settings.
Certain types of liquid detergent can
also create excessive amounts of
foam. If your basic dosage and
dosage quantity settings are correct,
we advise you to use a different
detergent.
Changing the basic dosages:
Press the corresponding i-DOS
1.
button (w or i) for approx. 3
seconds. The preset basic dosage
will appear in the display panel.
Set the required basic dosage using
2.
the Ready in ñ - or + buttons.
The setting is activated without
3.
needing to be confirmed. You can
now wait for a short while or press
any button (except the i-DOS
buttons) to revert to the original
setting.
The settings are saved until
Note:
they are changed again, even if the
machine is switched off.
en
45
Advertisement
Table of Contents
