Low Water Indicator - HoMedics MYCHILL PERSONAL SPASE COOLER PLUS Instruction Manual And Warranty Information

HOW TO FILL
5. Place the tank into the MyChill
cavity, making sure the tank is
firmly seated. Water will begin to
transfer into the water reservoir.
7. Adjust the front vents up or down to
direct the airflow as desired.

LOW WATER INDICATOR

This unit is equipped with a low water Refill Indicator. It will flash Red indicating the water tank needs to
be refilled. The pump will automatically turn off while the fan continues to run. At this time, please turn
the unit off and unplug it to refill the tank. Once a full tank is placed in the unit and the unit is turned
back on the low water indicator is reset and the pump is turned on.
The Personal Space Cooler is equipped with a safety device that automatically shuts the unit off when the
Top Cover is removed from the water reservoir.
6. Once the water stops emptying into the
water reservoir, remove the water tank
and repeat steps 2-5 to fully fill the
water tank and reservoir.
8. Your personal space cooler is
ready for use.
7