Connecting To A Wireless Network - LG 42LK550 Owner's Manual

NOTE
If you want to access the Internet directly on
y y
your TV, the broadband internet connection
should always be on.
If you cannot access the Internet, check
y y
the network conditions from a PC on your
network.
When you use Network Setting, check the
y y
LAN cable or check if DHCP in the router is
turned on.
If you do not complete the network settings,
y y
the network may not work properly.
COMPONENT
IN1
WIRELESS
CONTROL
AV IN1
AUDIO IN AUDIO IN AUDIO IN OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT ANTENNA ANTENNA ANTENNA/
LAN RGB IN (PC)
(RGB/DVI) AUDIO OUT CABLE IN

Connecting to a wireless network

The LG Wireless LAN for Broadband/DLNA
Adaptor allows the TV to connect to a wireless
LAN network.
The network configuration and connection method
may vary depending on the equipment in use
and the network environment. Refer to the setup
instructions supplied with your access point or
wireless router for detailed connection steps and
network settings.
Setting up the AP (Access Point) or the wireless
router is required before connecting the TV to the
network. The easiest method is the WPS button
method (Third method in this section).
(LV9500, LW9800 series: Built-in the Wi-Fi Module,
Unnecessary Wireless LAN for Broadband/DLNA
adaptor setup)
@
AV IN 2
AUDIO / VIDEO Internet
COMPONENT IN 2 H/P
AUDIO / Y P P
B R
NOTE
For enjoying pictures, music, or video stored
y y
on a PC using the router, a wired connection
is recommended.
When the wireless port of the router is used,
y y
there may be restrictions on some functions.
It is recommended that an Access Point (AP)
y y
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer than
1 m, the magic motion remote control may
not perform as expected due to frequency
interference.
49
ENTERTAINMENT
LAN WAN
Router
ETHERNET
Cable modem