LG 42LK520 Owner's Manual page 68

68
CUSTOMIZING SETTINGS
Setting
Color Gamut Advanced Control
Maximizes the utilization of color to increase color quality.
Expert Control
Displays color domain of the signal.
Edge Enhancer
Shows clearer and distinctive yet natural edges of the video.
This function works well over Sharpness UI 60 value.
xvYCC This is produces richer colors.
This feature represents rich colors as much as a conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
Color Filter This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
Expert Pattern This is the pattern used for expert adjustment.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
Color Temperature
Adjusts the overall color of the screen by changing the white baseline.
Plasma
LCD
Color Management As the tool used by the experts to make adjustments by using the test patterns, this does
System not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/
Blue/Cyan/Magenta/Yellow).
Color difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 - +30.
Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 - +30.
This feature is disable in RGB-PC and HDMI-PC mode.
» Standard: Displays standard set of colors.
y
» Wide: Increase number of colors used.
y
» Standard: Displays standard set of colors.
y
» Wide: Increase number of colors used.
y
» EBU: Mode to display EBU standard color area. (
y
»
SMPTE: Mode to display SMPTE standard color area. (
y
» BT709: Mode to display BT709 standard color area. (
y
a. Gamma : Select
Low, Medium, High
b. Method : 2 Points
Pattern: Inner,
y y
Outer
Red/Green/
y y
Blue Contrast,
Red/Green/Blue
Brightness
d. Apply to all inputs
Description
)
LCD
)
LCD
)
LCD
c. Method : 20 Point IRE
IRE (Institute of Radio Engineers) is the
y y
unit to display the size of the video signal
and can be set among 0, 5, 10, 15 - 100
Plasma TV. You can adjust Red, Green or
Blue according to each setting.
Red/Green/Blue: The adjustment range is
y y
-50 - +50.
c. Method : 10 Point IRE
Pattern: Inner, Outer
y y
IRE (Institute of Radio Engineers) is the unit
y y
to display the size of the video signal and
can be set among 0, 10, 20, 30 - 100. You
can adjust Red, Green or Blue according to
each setting.
Luminance: This function displays
y y
calculated luminance value for 2.2 gamma.
You can input luminance value you want at
100 IRE, than the target luminance value
for 2.2 gamma is displayed at every 10
steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is
y y
-50 - +50.