Advanced Picture Menu - Sony VPL-VW675ES Operating Instructions Manual

Advanced Picture Menu

You can adjust the gaps in color that have occurred after a long period of use.
Notes
• Auto Calibration results in relatively coarse calibration. No warranty is given for the color settings
to be the same as the factory default values.
• While performing "Pre Check" or "Adjust," the colors are projected automatically. This is not a
malfunction.
• Do not turn off the power or operate the remote control or control panel during "Pre Check" or
"Adjust", as the process may be canceled.
Tips
• dE is an indicator of changing color. The smaller the value of dE, the fewer the changes caused by
the color.
• Perform the calibration after the power has been on for more than 30 minutes.
• It takes a few minutes for "Pre Check" or "Adjust" to complete.
• When "Pre Check" or "Adjust" starts, the screen position may shift, as the lens returns to its factory
default position. After completion, the screen returns to its previous position automatically.
• If the environment changes, such as the brightness of the room, while performing "Pre Check" or
"Adjust", measurement may be affected.
• If the "Pre Check" or "Adjust" function fails, try it once again.
Setting items
Auto Calibration
Description
Pre Check: Checks the color difference against the factory default
settings, before calibration starts.
Adjust: Performs Auto Calibration.
Before/After: Toggles the factory default setting and the setting after the
calibration at a certain frequency. You can check the effect of the
calibration by monitoring the actual image.
Reset: Resets the calibration results, and returns to the factory default
settings.
30