Epson EB-Z8355WUNL User Manual page 95

Problem Solving
I want to change the language for messages and menus
Check
Change the Language setting.
The authentication setting of wireless LAN fails
Check
Is the time set correctly?
Mail is not received even if a problem occurs in the projector
Check
Is Standby Mode set to Communication On?
Did a fatal abnormality occur and the projector come to a sudden
stop?
Is power being supplied to the projector?
Is Mail Notification function set correctly in the configuration
menu?
"The battery that saves your clock settings is running low." is displayed.
Cause
The internal power supply that saves your clock settings is
running low.
Adjust the Language setting from the configuration menu. s Extended Menu - Language
If the wireless LAN is set correctly but the authentication setting fails, the time may not be set correctly. Check
if it is set correctly. s Extended Menu - Time/Schedule Settings
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the configuration menu. s Extended Menu - Standby Mode
When the projector comes to a sudden stop, e-mail cannot be sent.
If the abnormal state continues, contact your local dealer or the nearest address provided in the Support and Service
Guide. s Epson Projector Contact List
Check that your electrical outlet or power source is functioning correctly.
Mail notification of problems is sent according to the settings on the Mail Notification menu in the configuration menu.
Check if it is set correctly.
s Network Menu - Mail Notification Menu
Contact your local dealer or the nearest address provided in the Support and Service Guide. s
Contact List
Remedy
Remedy
p.57
Remedy
p.57
p.73
Remedy
95
p.57
Epson Projector