Table of Contents
Advertisement
Setting items
Color Correction
Clear White
x.v.Color
HDR
Description
On: Adjusts Hue, Saturation or Brightness of the selected colors.
Repeat steps 1 and 2 described below to specify the target color.
1 Press M/m to select "Color Select," then press </, to select the
color you want to adjust among "Red," "Yellow," "Green," "Cyan,"
"Blue" and "Magenta."
2 Press M/m to select "Hue," "Saturation" or "Brightness," then adjust
them to suit your taste using </, while watching the projected
picture.
Off: The "Color Correction" effect is not applied.
Emphasizes vivid whites.
High/Low: You can adjust the "Clear White" effect.
Off: The "Clear White" effect is not applied.
Set this item when connecting the unit with equipment that supports
x.v.Color and playing back an x.v.Color video signal.
On: You can play back an x.v.Color video signal.
Off: The "x.v.Color" function is not applied.
Tip
Setting x.v.Color to "On" disables gamma adjustment.
Sets how to play back HDR content.
Auto: Distinguishes HDR content automatically and applies the optimal
picture quality.
When an input signal supports BT.2020, the "Color Space" is set to
"BT.2020" automatically. When a signal other than BT.2020 is input, the
mode set in "Color Space" is applied. ("BT.2020" is not available in this
case.)
HDR10: Set when playing back HDR10-compatible content.
HLG: Set when playing back HLG-compatible content.
Off: Set when playing back content other than HDR content.
All of the modes of "Color Space" are selectable when "HDR10,"
"HLG," or "Off" is selected.
Note
If the setting is not correct for the input content, the bright and dark areas
of the video may appear too bright or too dark. If you see the color
banding within the displayed image, you can eliminate it by turning off
the HDR setting of the connected device and the projector.
28
Advertisement
Table of Contents
