Table of Contents
Advertisement
5
Maintenance
Handling the Unit
When shipping the Unit
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Keeping the exterior surfaces
clean
• Do not use volatile liquids such as
insecticide spray near the unit.
• Wiping with strong pressure may damage
the surface. Do not leave rubber or plastic
products in contact with the unit for a long
period of time.
Cleaning the Unit
To clean the unit, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent
solution.
Do not use strong solvents such as alcohol,
benzene, or thinner, as these might damage
the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service center.
HT355SD-F2_DLKALL_ENG_4727.indd 27
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion.
Before playing, clean the disc with a clean
cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol,
benzene, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
Maintenance
5
2010-03-31 ¿ÀÈÄ 12:01:36
Advertisement
Table of Contents
