nICAm ReCePtIon (In AnAlogue mode only)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
When nICAm mono is received, you can select nICAm mono or Fm mono.
When nICAm stereo is received, you can select nICAm steReo or Fm mono.
2
If the stereo signal is weak, switch to Fm mono.
When nICAm dual is received, you can select nICAm duAl I, nICAm duAl II or
3
nICAm duAl I+II or Fm mono.
sPeAkeR sound outPut seleCtIon
In AV, Component, RGB and HDMI mode, you can select output sound for the left and
right loudspeakers.
Select the sound output.
l+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from
audio R input is sent to the right loudspeaker.
l+l: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
107