Advertisement
Cleaning and maintaining the air conditioner
Cleaning air filter and grille
Open the front grille.
Open the blades on the left and right side of the
Samsung logo. Press both of the levers and pull the
grille downward. Two safety clips are mounted to the
front grille to prevent it from dropping.
Clean the grille and Air filter with a vacuum cleaner
or soft brush. If dust is too heavy, then rinse it with
running water and dry it in a ventilated area.
For best conditions, repeat every two weeks.
If the Air filter dries in a confined (or humid) area, odors
may generate. If it occurs, re-clean and dry it in a
well-ventilated area.
Insert the Air filter back in its original position.
You will hear a click sound when the Air filter is
properly placed.
• The illustration shown above may differ from yours depending on your model.
• A fter cleaning the filter, press the Filter Reset button on the remote control for 2 seconds to reset the filter
NOTE
schedule. Filter sign indicator will be on for cleaning time.
• I f the angle on the air flow blades has been changed by user due to opening the front grille for installation or
maintenance, you must turn off the circuit breaker and turn it on again before using the air conditioner.
Otherwise, angles of the each angle can be different or some of the blade may not close when the product is off.
12
Detach the front grille.
Remove the safety clip first and then remove the
hinge. Pull the green switch on the hinge part down
and then press and pull the hinge part to remove
the grille. (There are two hinges on the grille and
you must apply this step on both of them to remove
the grille.)
❈If you want to clean the filter only, you do not have to
detach the grille. Follow step 4 and 5
Pull out the Air filter.
Attach the front grille.
Reverse the above steps to attach the front grille.
Advertisement
