Common Interface - Philips 42PFL74 6M Series User Manual

Common interface

What you can do
To watch some digital TV programmes, you
need a Conditional Access Module (CAM).
If a CAM is inserted and subscription fees
are paid, you can watch the channel. The
applications, functions, the content and the
onscreen messages vary for each CAM
service.
What you need
Caution: To protect the CAM from damage,
insert the CAM according to these
instructions.
Notes:

This TV supports CI as well as CI+. CI+
allows service providers to offer
premium HD digital programmes with a
high level of copy protection.

Refer to the documentation from your
service operator on how to insert a
smart card into the Conditional Access
Module.
EN 58
1. Switch off the TV.
2. Follow the directions printed on the CAM
and insert the CAM into the Common
Interface at the side of the TV.
3. Push the CAM in as far as it will go, then
wait for the CAM to be activated. This takes
a few minutes.
To prevent digital services from being
deactivated, do not remove the CAM from
the slot when it is in use.
Watch CAM services
1. After inserting and activating the CAM,
OPTIONS.
press
2. Select [Common interface], then press
OK.
3. Select the CAM provider and press OK.