Function
s Manual setting
< Method >
1. Press the MENU button and then use <,> button to select the
menu.
2. Press the ∧,∨ button to select Communication.
3. Press the <,> button to select LAN.
4. Press the ∧,∨ button to select Network Setting.
5. Press the <,> button to select Manual setting.
6. Set IP address of PC and set that of projector to be in the same width with PC.
Press the ∧,∨ button to change number, and the <,> to move to next category
IP Address
PC
192.168.0.10
Projector
192.168.0.5
• Press menu button to go back.
IP Address
1 9 2 . 1 6 8 . 0 0 0 . 0 0 5
Subnet Mask
2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
Gateway
1 9 2 . 1 6 8 . 0 0 0 . 0 0 1
Press OK Key
ꘀ
Prev.
Move
<>
7. Press ◉ confirm button after IP setting.
IP address is saved.
8. Network setting is done manually
IP setting in progress, Please wait...
IP setting is succeeded.
38
Subnet Mask
255.255.255.0
192.168.0.1
255.255.255.0
192.168.0.1
ꕌ
Adjust
ꕍ
Keystone
Blank Image
Screen Capture
Lamp mode
Monitor Out
Communication
Set ID
Network Setting
High Altitude
Lamp Time
ꘀ
Gateway
<
Black
High bright
<
<
RGB1
<
LAN
<
1
<
Manual
0 Hr
◉ OK
Prev.
Move
<>
>
>
>
>
>
>