Acer P1250B Series User Manual page 44

34
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
•
•
Security
If you forget your administrator password, do the following
to retrieve the administrator password:
•
•
Lock User Startup Screen
This function is set to "OFF" by default. If set to "ON", the
startup screen is locked and cannot be changed by the
"Startup Screen" and "Screen Capture" functions.
LAN IP/Mask
Identify IP and Mask address.
WiFi IP/Mask
Identify IP and Mask address.
MAC Address
Identify MAC address.
Wake on LAN (Standby)
Selecting "On" enables the function. The projector will be
powered on from standby mode when LAN cable is plugged
LAN in. You'll have to download a WOL (wake-on-LAN; WOL)
tool or application on your computer or smart device to use
this function.
DHCP
Selecting "On" when you are in a DHCP environment to
obtain the IP address automatically. Selecting "Off" and
you'll have to manually configure the IP and Mask address.
LAN Reset
Press "ENTER" after choosing "Yes" to return all items on the
Network Setting page to the default settings.
Press "ENTER" after choosing "Yes" to return the display
Reset
parameters on all menus to the factory default settings.
Press to change "Administrator Password".
The factory default of "Administrator Password" is
"1234".
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
If the Security Card is lost, please contact your local Acer
service center.