LG M2362DP-PC Owner's Manual page 31

Connecting with an HDMI to DVI cable
1
Connect the DVI output of the PC to the HDMI/DVI IN jack on the SET.
2
Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the SET.
3
Turn on the PC and the SET.
4
Select HDMI input source using the INPUT button on the remote control.
!
NOTE
►If you want to use HDMI-PC mode, you must set the input label to PC mode.
►Connect the signal input cable and tighten it up by turning in
the direction of the arrow as shown in the figure.
2
1
31