Frame comp. - No
• {Enable} - Choose to enable or disable the Tiling function. If enabled,
the display will apply the settings in {H monitors}, {V monitors},
{Position}, and {Frame comp.}.
• {Switch on delay} - Set the power-on delaying time (in seconds).
The default option {Auto} allows a sequential powering-on for each
display by their ID number when multiple displays are connected.
The options are: {Off / Auto / 2 ~ 255}
NOTE: T he Tiling function will be disabled during using PIP function.
Date and time
Adjust the current date and time for the display's internal clock.
1. Press [OK] button to enter the submenu.
2. Press [ ] or [ ] button to toggle between {Year}, {Month}, {Day},
{Hour}, {Minute}, and {Daylight saving time}.
3. Press [ ] or [ ] button to adjust all settings except {Daylight
saving time}.
4. Press [OK] button to enter the {Daylight saving time} submenu.
5. Press [ ] or [ ] button to select item, press [ ] or [ ] button to
adjust.
• {Daylight saving start date} - Select {1st / 2nd / 3rd / 4th / last}
Sunday of the month {Jan ~ Dec}.
• {Daylight saving stop date} - Select {1st / 2nd / 3rd / 4th / last}
Sunday of the month {Jan ~ Dec}.
• {Correction time} - The options are: {0.5 / 1.0 / 1.5 / 2.0}
• {Daylight saving correction} Select {On} to enable this function.
Off Timer
Set the display to turn itself off to standby mode within an amount of
time specified.
The options are: {Off, 1 ~ 24} hours from current time.
NOTE: W hen the "Off timer" is activated, the "Schedule" settings will
be disabled.
Schedule
This function allows you to program up to 7 (seven) different scheduled
time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: W e recommend you to set up current date and time in the
{Date and time} menu before using this function.
1. Press [OK] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select a schedule item (item number 1 ~ 7),
and then press [OK] button to mark it the item number.
3. Press [ ] or [ ] button to select the schedule:
P ower-on schedule: Press [ ] or [ ] button to set the hour
1
and minute for the display to turn on.
Power-off schedule: Press [ ] or [ ] button to set the hour
2
and minute for the display to turn off.
Select or leave an empty "__" for both the hour and minute slot if
you do not want to use this power-on or power-off schedule.
Input-source selection: Press [ ] or [ ] button to select an
3
input source. If no input source is selected, the input source
will remain the same as last selected.
49
_ _
_ _
_
1
2
3
_ _
_ _
_
4
86BDL4150D