Filter Type Change - Philips AC3256/60 User Manual

4
Touch and hold
force reset the filter lifetime of the
NanoProtect filter AC and exit the
filter force reset mode.

Filter type change

1
Touch and
for 3 seconds to enter the filter type
change mode.
» Code (A3) of the NanoProtect
filter Series 3 displays on the
screen.
for 3 seconds to
3s
simultaneously
3s
2
Touch to select the filter code of
the new filter you will use.
3
Touch and hold
confirm the filter code of the new
filter.
Note
• After you have selected the filter code
of the new filter using the
if you do not touch any other buttons
in 10 seconds, the appliance will
automatically confirm the filter code of
the new filter.
for 3 seconds to
3s
button,
EN 19