Canon PIXMA G4210 Online Manual page 387

• If Manual/auto switch of the advanced setting is set to ON, set RX start time to longer
than the time before the answering machine starts playing the answering message. After
making this setting, we recommend that you call the answering machine using a mobile
phone, etc. to confirm that messages are recorded successfully in the answering machine.
• Set your answering machine to answering mode and adjust it as follows:
- The entire message should be no longer than 15 seconds.
- In the message, tell your callers how to send a fax.
• When the call is a voice call:
The telephone will ring when a call incomes.
Pick up the handset, and talk on the telephone.
Note
• If the printer unexpectedly switches to fax reception during telephone calls, set User-friendly
RX of the advanced setting to OFF.
• If Manual/auto switch of the advanced setting is set to ON, you must answer an incoming call
by picking up the handset within the time specified in RX start time. Otherwise the printer will
switch to fax reception.
When Fax only mode is selected:
• When the call is a fax:
The printer will receive the fax automatically.
Note
• If a telephone is connected to the printer, the telephone will ring when a call incomes.
• You can change the number of times to ring the telephone with Incoming ring of the advanced
setting.
387