LG 55WV70MD-B.AEU Owner's Manual page 74

74
CONTROLLING THE MULTIPLE MONITORS
25. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07. Repeat on Monday
08. Repeat on Tuesday
09. Repeat on Wednesday
0A. Repeat on Thursday
0B. Repeat on Friday
0C. Repeat on Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* Enter "fe [Set ID] ff" for checking Off Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
To check current Off Timer(Repeat Mode/ Time)
function.
Transmission
[f][e][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data f1~f7: 1st~ 7th element of schedule list
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4][x]
Data1 f1~f7: 1st~ 7th index of schedule list
Data2 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07. Repeat on Monday
08. Repeat on Tuesday
09. Repeat on Wednesday
0A. Repeat on Thursday
0B. Repeat on Friday
0C. Repeat on Saturday
Data3 00~17: 00 ~ 23 Hours
Data4 00~3B: 00 ~ 59 Minutes
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07. Repeat on Monday
08. Repeat on Tuesday
09. Repeat on Wednesday
0A. Repeat on Thursday
0B. Repeat on Friday
0C. Repeat on Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* Enter "fd [Set ID] ff" for checking On Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
* On Timer Input command should be executed
followed just after executing this command to set On
Timer schedule properly.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
To check current On Timer(Repeat Mode/ Time)
function.
Transmission
[f][d][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data f1~f7: 1st~ 7th element of schedule list
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4][x]
Data1 f1~f7: 1st~ 7th index of schedule list
Data2 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07. Repeat on Monday
08. Repeat on Tuesday
09. Repeat on Wednesday
0A. Repeat on Thursday
0B. Repeat on Friday
0C. Repeat on Saturday
Data3 00~17: 00 ~ 23 Hours
Data4 00~3B: 00 ~ 59 Minutes