7. Check that ON lamp is off and
Important
• Do not unplug the printer while the ON lamp is lit or flashing, as it may cause malfunction or
damage to the printer, making the printer unable to print.
8. Open the scanning unit / cover again.
9. Remove the carriage stopper (A) and insert it all the way into the hole in the printer side.
Pull the carriage stopper forward while pulling it up and insert it in the same orientation.
Note
• Insert the carriage stopper by aligning its protrusions with the indentations on the printer.
10. Close the scanning unit / cover gently.
unplug power
cord.
142