Setup the Wireless System
Note:
If there is a strong electromagnetic wave product
nearby, an interference may be occurred. Put the unit
(Wireless Receiver and main unit) away from there.
(Ex : Micro wave oven)
Wireless transmitter
LED indicator of wireless transmitter
* LED indicator - "BLUE"
The main set is turned on, everthing is connected
and transmitting.
* LED indicator - "RED"
The wireless transmitter is in standby mode.
* LED indicator - "OFF (No display)"
The main set is turned off.
SIGNAL
ID./CH.
DC IN
10
Wireless Receiver
LED indicator of Wireless Receiver
* LED indicator - "BLUE"
LED indicator
The Wireless Receiver is receiving a signal of
Displays the operating
wireless transmitter.
status.
* LED indicator - "RED"
The Wireless Receiver is in standby mode.
Assembling and Connecting to
the Speakers
DC IN connector
The front speakers are detached from the speaker
stands. Connect the speaker cords and assemble the
ID (ID.)
front speakers from speaker stands as illustrated.
button
SOUND SIGNAL
1. Connect the speaker cords to the appropriate
connector
2. Attach the front speakers to the speaker stands by
LED indicator
Displays the operated
status.
Rear speaker connector
Power cord
terminals on the bottom of each front speaker.
rotating the screw.