FujiFilm XF10 Owner's Manual page 89

3
Press the focus stick (focus lever) down and choose the shots
that will be used to create the composite image.
Option Option
SELECT FOCUS SELECT FOCUS
AUTO AUTO
SELECT RANGE SELECT RANGE
O
A tripod is recommended; if no tripod is available, hold the camera
steady during shooting. If the subject moves during shooting, the im-
age may be distorted or unnatural, while banding may occur in imag-
es taken under fl ickering or transient light sources such as fl uorescent
lights. The process of creating a composite image reduces the angle of
view. The desired results may not be achieved with moving subjects,
distant landscapes, or subjects that lack depth.
N
If CONTINUOUS is selected for A SCREEN SET-UP > IMAGE DISP.,
the most recent picture will be displayed when shooting ends, al-
lowing you to create a composite image without exiting to playback
mode.
The fl ash cannot be used.
The area in focus in any given frame is indicated by a
square ( ). Highlight a focus point using the focus stick
w
and press the Q button to create a composite image
from the frames for which the selected area is in focus.
The camera creates a composite image from the areas
that are in focus.
Create a composite image from the frames in which a
selected area is in focus.
Continuous Shooting (Burst Mode)
Description Description
5
73