Making Ice Cubes - Zanussi ZFE102T Instruction Booklet

Making ice cubes

A plentiful supply of ice can be made in the two
trays located above the ice servery. Fill the trays 3/
4 full to allow the ice to expand.
To dispense the ice, fully turn the dial as shown in
Fig. 11.
The cubes will fall easily from the trays, into the
servery below.
Never consume ice-cubes which have just come out
of the freezer. Their extremely low temperature can
cause frost burns.
3P 19
Overtemperature alarm and memory device
In the event of an abnormal temperature rise inside
the freezer compartment (e.g. power cut) warning
light (H) will start to flash.
The alarm will continue to flash even after the
temperature has returned to normal; it is therefore
quite possible to find that the freezer temperature
indicator may actually be showing the normal
storage temperature values: flashing of warning
light (H) indicates that there has been a problem
some time previously.
To stop it flashing press button (G).
As soon as this is done, the alarm function is reset
and the hottest temperature reached within the
compartment, which has been memorised by the
device, flashes for 10 seconds on indicator (D).
After 10 seconds, indicator (D) resumes its normal
thermometer function.
14
Defrosting the appliance
Defrosting of the freezer. Superchill and
refrigerator is automatic.
The water is discharged, via pipes, into a tray
located at the back of the appliance, above the
compressor, where it evaporates.
Fig. 11
3P 18
Fig. 12