Table of Contents
Advertisement
Turn Wi-Fi On or Off When the Jetpack Is Tethered
If a device is tethered to the Jetpack through a USB connection, you can turn the Jetpack's
Wi-Fi signal off so that other devices cannot connect to the Jetpack Wi-Fi network. If you
allow the Wi-Fi signal to stay on, all devices, including the tethered device, can connect to the
Jetpack Wi-Fi network and access the Internet.
Note:
To tether your Jetpack to a computer, you must download the
necessary device drivers using TRU-Install. For more information, see
Configure a Tethered Connection
To turn on the Wi-Fi signal if a device is tethered to the Jetpack:
1.
From the Jetpack Admin website home page, select Jetpack Settings > Jetpack >
Preferences.
2.
Select or clear the Turn off Wi-Fi when tethered check box.
3.
Click the Save button.
Your settings are saved.
Enable or Disable Wi-Fi Multimedia
By default Wi-Fi Multimedia is enabled to automatically use Quality of Service (QoS) to
assign priority to Wi-Fi traffic based on whether it is video, voice, audio, and so on.
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
Customize the Wi-Fi Settings
39
on page 21.
Advertisement
Table of Contents
