Channel List Copy - Philips 50PUT7383 User Manual

Select Store Current Channel or Store as New
Channel and press OK. The new channel number is
shown briefly.
You can redo these steps until you have found all
available analogue TV channels.
5.2

Channel List Copy

Introduction
Channel List Copy is intended for dealers and expert
users.
With Channel List Copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel List Copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV.
• Both TVs have compatible software versions.
Current channel version
To check the current version of the channel list...
1 - Press , select All Settings and press OK.
2 - Select Channels, select Channel List Copy,
select Current Version and press OK.
3 - Press OK to close.
Current software version
To check the cuurent version of the TV software...
1 - Press , select All Settings and press OK.
2 - Select Update Software and press  (right) to
enter the menu.
3 - Select Current Software Info and press OK.
4 - The version, release notes and creation date are
shown. Also, the Netflix ESN Number is shown if
available.
5 - Press  (left) repeatedly if necessary, to close
the menu.
Copy a Channel List
To copy a channel list...
1 - Switch on the TV. This TV should have channels
installed.
2 - Plug in a USB flash drive.
3 - Press , select All Settings and press OK.
4 - Select Channels > Channel List Copy and
press OK.
5 - Select Copy to USB and press OK. You might
be asked to enter the Child Lock PIN code to copy the
channel list.
6 - When copying is done, unplug the USB flash
drive.
7 - Press  (left) repeatedly if necessary, to close
the menu.
Now you can upload the copied channel list onto
another Philips TV.
Channel List Version
Check the current version of the channel list...
1 - Press , select All Settings and press OK.
2 - Select Channels and press  (right) to enter
the menu.
3 - Select Channel List Copy and select Current
Version, then press OK.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Upload a Channel List
To not Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2 - Plug in the USB flash drive that holds the channel
list of the other TV.
3 - To start the channel list upload, press ,
select All Settings and press OK.
4 - Select Channels > Channel List Copy > Copy
to TV and press OK. Enter your PIN code if
necessary.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, see chapter Reinstall All Channels. Start this
procedure until you reach the country setting.
Press  BACK to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
19