Picture And Sound Setup; Tv Settings; Picture - Philips 55PFL5903 User Manual

Picture and sound setup

Before you begin:
You must set Home in Location.
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press and use to select Setup then press OK.
2
Use to select Picture and sound setup, then press OK.
3
Follow steps 7 to 8 in Initial setup

TV settings

Picture

Before you begin:
You must set Home in Location.
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press and use to select Setup then press OK.
2
Use to select TV settings, then press OK.
3
Use to select Picture, then press OK.
Auto picture
Picture
Backlight
Sound
Contrast
Features
Brightness
Installation
Accessibility Color
Tint
Sharpness
Pixel Precise Ultra HD
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
4
Use to select the item you want to adjust, then press OK.
The following picture settings can be configured. Depending on the
format of the picture source, some picture settings are not available.
To set your TV to a predefined picture setting.
Personal
DOLBY VISION
Bright
DOLBY VISION
Dark
Standard
Natural
Auto picture
Vivid
Sports
Movie
Game
Energy saving
Internet video Optimized for low bit-rate
p. 35
p. 21
p. 35
The customized settings you
defined using the Picture menu.
When receiving Dolby Vision
video signal, the unit is set to a
picture quality suitable for
viewing in a bright environment.
When receiving Dolby Vision
video signal, the unit is set to a
picture quality suitable for
viewing in a dark environment.
For normal TV viewing.
Ideal picture mode for viewing
high quality content without any
picture enhancements.
Enhanced picture contrast and
sharpness for viewing in a well-lit
room.
Brilliant picture settings for high
action.
Deep picture settings for a
cinematic experience.
Optimized for PCs and game
consoles.
Eco TV settings for low power
consumption.
internet video.
When you adjust the following settings, Personal picture will be set
automatically.
Cursor
To reduce power
Backlight consumption and
brightness
To decrease contrast
Contrast
To decrease
Brightness
brightness
To decrease color
Color
intensity
To adjust color hues, especially to make skin
Tint
tones appear more natural.
To soften
Sharpness
Enters sub-menus to adjust the following
settings:
Pixel Precise Ultra (Dynamic contrast, Color enhancement, Black
HD stretch, 120 PMR, 4K UHD Upscaling, Macro
Dimming, Noise reduction and MPEG artifact
reduction)
Enters sub-menus to adjust the following
settings:
Advanced settings
(Color alignment, Custom color management,
Gamma, Blue stretch and Film mode)
Automatic
Super zoom
4:3
Movie expand 14:9
Picture format Movie expand 16:9
Wide screen
Full
Manual Zoom
Unscaled
PC
Mode selection
HDTV
Cursor
Horizontal To move PC screen left To move PC screen
position
To move PC screen
Vertical position
down
Off
Dolby Vision
Notification
On
Note(s)
The auto picture modes - DOLBY VISION Bright and DOLBY VISION Dark
are available only when Dolby Vision content is being played back.
31 .
English
Cursor
To increase power
consumption and
brightness
To increase contrast
To increase brightness
To increase color
intensity
To sharpen
Changing picture
format p. 24
To turn off image
enhancement features
which makes the TV to
act purely as a monitor
To enable image
enhancement features
to improve picture
quality
Cursor
right
To move PC screen up
To set Dolby Vision
Notification to off
To set Dolby Vision
Notification to on
Continued on next page.