Connecting With A Hdmi To Dvi Cable - LG 19LG3000 Owner's Manual

Connecting with a HDMI to DVI cable


Connect the DVI output of the PC to the HDMI IN 1(DVI) jack
on the TV.

Connect the PC audio output to the AUDIO IN (RGB/DVI) jack
on the TV.

Turn on the PC and the TV.

Select HDMI1 input source using the INPUT button on the
remote control.
NOTE
 To enjoy vivid picture and sound, connect a PC to
the TV.
 Avoid keeping a fixed image on the TV's screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use a
screen saver when possible.
 Connect the PC to the RGB (PC) or HDMI IN (or
HDMI/DVI IN) port of the TV; change the resolution.
 There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC mode.
Change the PC mode to another resolution or change
the refresh rate to another rate or until the picture
is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or
consult the manufacturer of the PC graphic card.
 The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
 Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or the
signal cable from the HDMI output port of the PC to
the HDMI IN (or HDMI/DVI IN) port on the TV.
 Connect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included with
the TV).
 If using a sound card, adjust PC sound as required.
24
HDMI IN 1
 This TV uses a VESA Plug and Play Solution. The
TV provides EDID data to the PC system with a DDC
protocol. The PC adjusts automatically when using
this TV.
 DDC protocol is preset for RGB (Analog RGB), HDMI
(Digital RGB) mode.
 If required, adjust the settings for Plug and Play
functionality.
 If the graphic card on the PC does not output analogue
and digital RGB simultaneously, connect only one of
either RGB or HDMI IN (or HDMI/DVI IN) to display
the PC output on the TV.
 If the graphic card on the PC does output analogue
and digital RGB simultaneously, switch the TV to
either RGB or HDMI; (the other mode is set to Plug
and Play automatically by the TV.)
 DOS mode may not work depending on the video card
if you use a HDMI to DVI cable.
 For best picture quality, using an RGB-PC cable under
5m is recommended.
AUDIO IN
(RGB/DVI)
(DVI)