LG 55LW980T Owner's Manual page 101

Basic image options
Setting
Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced with-
out any video signal loss.
Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture.
Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour Adjusts intensity of all colours.
Tint Adjusts the balance between red and green levels.
Colour Temp. Set to warm to enhance hotter colours such as red, or set to cool to enhance cooler colours
such as blue.
Advanced Control or Customizes the advanced options.
Expert Control
Picture Reset Restores the options of each mode to the factory default.
NOTE
It is not available to use this function in "Intelligent Sensor".
y
You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
y
When the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness, H Sharp-
y
ness, V Sharpness, Colour or Tint.
Advanced image options (Depending on model)
Setting
Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen.
The picture is improved by making bright parts brighter and dark parts darker.
Dynamic Colour Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue and green white look more vivid.
Clear White Make the white area of screen brighter and more white.
Skin Colour It detects the skin area of video and adjusts it to express a natural skin colour.
Noise Reduction Reduces screen noise without compromising video quality.
Super Resolution Provides a crystal-clear picture by improving the details in an area that has a blurry or
unclear picture.
MPEG Noise Reduction Removes noise caused by compressing video.
Gamma You can adjust brightness of dark area and middle gray level area of the picture.
»
»
»
Black Level Sets black level of the screen to proper level. This function is available in the following modes:
TV(NTSC-M/J, PAL-M, PAL-N), AV (NTSC-M/J, PAL-M, PAL-N), HDMI or Component.
»
»
»
Eye Care Adjusts the brightness of the screen to prevent the screen from being too bright. Dims
extremely bright pictures.
This feature is enabled in "Picture Mode-Standard, Game".
NOTE
If you use the "Energy saving - Off, Minimum, Medium", Backlight will be available.
y
Low: Make the dark and middle gray level areas brighter.
Medium: Express the original picture level.
High: Make the dark and middle gray level area darker.
Auto: Sets black level of the screen to High or Low automatically according to the input
signal level.
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
CUSTOMIZING SETTINGS
Description
Description
101