Advertisement
Available languages
Available languages
3 Installation
1. Remove the antenna from the protective foil.
2. Fit the union nut to the connector of the device.
3. Screw the union nut onto the connector of the device. The tighten-
ing torque at the R-SMA-Connector is 1 Nm.
4. For outdoor installation, protect the connectors from environmental
influences (e.g. with self-vulcanizing adhesive tape or a shrink-on
hose).
5. The antenna should be aligned so that they are vertical to the de-
vice. When necessary, the antenna can also be tilted at an angle
between 0° und 90°.
4 Technical specifications
Weight
Material
Degree of protection
Connector
Operating temperature
Storage temperature
Silicone-free
Frequency range
Antenna gain
2.4 GHz
5 GHz
Polarization
Horizontal radiation angle
Impedance
VSWR
5 Dimension drawing
Dimensions are specified in mm.
21.5 g
Brass
IP65
R-SMA-Connector male
-30°C ... 70° C
-30°C ... 70° C
No
2.4 – 2.5 GHz
5.15 – 5.85 GHz
2.0 dBi
3.0 dBi
vertical
360°
50 Ω
< 2,0
6 Radiation pattern
Horizontal 2450 MHz
Horizontal 5250 MHz
Vertical 2450 MHz
Vertical 5250 MHz
Advertisement
