5.1 Speaker Setup - LG HT304SL Manual

HT304SL-AM_DCHLLLK_ENG_4523
Adjusting the display settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3] : Select when a standard 4:3 TV is connected.
[16:9] : Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you'll need to define how you would like
wide screen programs and films to be displayed on your TV screen.
[Letterbox] : This displays a wide screen picture with black bands at the top
and bottom of the screen.
[Panscan] : This fills the entire 4:3 screen, cropping the picture as necessary.
Adjusting the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo.
This function is effective for multi-channel karaoke DVDs only.
HD AV Sync - Sometimes Digital TV encounters a delay between picture and
sound. If this happens you can compensate by setting a delay on the sound so
that it effectively 'waits' for the picture to arrive: this is called HD AV Sync. Use
U U u u (on the remote control) to scroll up and down through the delay amount,
which you can set at anything between 0 and 300m sec.
Semi Karaoke – When a chapter/ title/ track is fully finished, this function
shows the score in the screen with a fanfare sound.
Available discs for the Semi Karaoke function: DVD discs/ DVD Karaoke Discs
[On] : When you finished singing a score will appear on the screen.
[Off] : Fanfare and score do not appears on the screen.
- This function operate on the DVD/CD mode.
- The Semi Karaoke function is available only when a microphone is connected.
- In case that a fanfare or score appears when a chapter of a movie file is
changed during playback, set the Semi Karaoke to "Off" at the setup menu
or disconnect the microphone.
3/2/09 7:20 PM Page 9

5.1 Speaker Setup

1 Open the settings menu
2 Select to the audio icon
3 Select right to enter the audio menu, then
select 5.1 Speaker Setup
4 Select the speaker you want to adjust
5 Select a option and change
the settings
6 Set the output level (volume) of a speaker
from -5dB to +5dB.
The speaker size setting are
fixed, so you cannot change the setting.
7 If you connect speakers to your unit,
setting the Distance lets the speakers to
know how far the sound has to travel to
reach your set listening point. This allows
the sound from each speaker to reach the
listener at the same time.
8 Test the signals of each speaker
Adjust the volume to your taste
according to these signals.
9 Save your settings and exit the Setup
menu
ON REMOTE
SETUP
U U u u
i i U U u u ENTER
I I i i
U U u u I I i i
I I i i
I I i i
I I i i
RETURN
9