Step 4 Optional: Extending The Power Cable - Samsung AC MXAD Series Installation Manual

Installation Procedure
Outdoor-to-indoor power and communication
cables specifications
Indoor power supply
Power supply Max/Min (V)
1ø, 220-240V,
±10%
50/60 Hz
Communication cable
0.75 mm
• Power supply cords of parts of appliances for
outdoor use shall not be lighter than polychloroprene
sheathed flexible cord. (Code designation IEC:60245
IEC 57 / CENELEC: H05RN-F or IEC:60245 IEC 66 /
CENELEC: H07RN-F)
• When installing the indoor unit in a computer room
or net work room, use the double shielded (tape
aluminium / polyester braid + copper ) cable of
FROHH2R type.
14
English
Indoor power cable
Check a indoor install
manual
(1.5 mm 2 ~ 2.5 mm 2 ,
3 wires)
2 , 2 wires
Step 4 Optional: Extending the power
cable
1 Prepare the following tools.
Tools
Crimping pliers
Connection sleeve
(mm)
Width 19
Insulation tape
Contraction tube
(mm)
2 As shown in the figure, peel off the shields from the
rubber and wire of the power cable.
• Peel off 20 mm of cable shields from the pre-
installed tube.
CAUTION
• For information about the power cable
specifications for indoor and outdoor units, refer
to the installation manual.
• After peeling off cable wires from the pre-installed
tube, insert a contraction tube.
Power cable
20
Pre-installed tube for the power cable
(Unit: mm)
20
Spec Shape
MH-14
20xØ6.5
(HxOD)
mm
70xØ8.0
(LxOD)
20 20
60
120
180
(Unit: mm)