3. When there is no microwave oscillation
1) When touching the START pad, oven lamp does not turn on.
Fan motor does not rotate, but cook indicator in display comes on.
- Check method
STATE
RELAY 2 ON
RELAY 2 OFF
2) When touching the START pad, oven lamp turns on.
Fan motor and turntable rotate and cook indicator in display comes on.
- Check method
STATE
RELAY 1 ON
RELAY 1 OFF
4. When the door is opened during operation, the count down timer does not stop.
-Check method
STATE
1) DOOR OPEN
2) DOOR CLOSED
CHECK NO
1
Check the stage (ON, OFF) of the door open monitor switch by
resistance measurement.
5. When the digital clock does not operate properly .
Refer to Circuit Diagram.
POINT
IC 1 PIN 8
* If clock does not keep exact time, you must check resistor R12, R17, D8, C3 and zener diode ZD1.
POINT
POINT
POINT
METHOD
WAVE FORM
28
A
5VDC
GND
A
5VDC
GND
A
OPEN
CLOSE
T:20ms(50Hz)
T:16.67ms(60Hz)
B
GND
15VDC
B
GND
15VDC
B
5VDC
GND
REMEDY
Replace door open monitor
switch.