Direct Unit Mounting
The previous directions are the preferable way to mount the new rear grill. The unit's performance is slightly better and
the possibility of draughts is reduced. As a last resort, direct mounting of the grille to the unit can be considered.
Note: The grille must be installed prior to inserting the unit into the sleeve.
2.Position the grille over the rear of the unit making sure that:
a. The double set of screw holes are at the bottom.
b. The fins of the grill are pointed away from the unit.
seal
Grille Screws
Installation Instructions
Location
1
Hole
Grille &
lange
seal
Screw
13