Table of Contents
Advertisement
Appendices
Please note that
™
damage resulting from
incorrect installation
will void the warranty.
Lens
60
English
Ceiling Mount Installation
1.
To prevent damage to your projector, please use the Optoma
ceiling mount.
2.
If you wish to use a third party ceiling mount kit, please ensure
the screws used to attach a mount to the projector meet the fol-
lowing specifications:
Screw type: M6
`
Maximum screw length: 12mm
`
Minimum screw length: 10mm
`
Warning:
1. If you buy a ceiling mount from another company, please be sure to use the correct
screw size. Screw size will vary depending on the thickness of the mounting plate.
2. Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector.
3. Avoid installing the projector near a heat source.
110.00
110.00
344.2
Unit: mm
172.1
Advertisement
Table of Contents
