Using Menu Mode - Quasar Palmcorder VM-L152 Operating Instructions Manual

Using MENU Mode

MENU Mode (CAMERA) Screen
1
2
3
4
5
6
7
8
MENU Mode (VCR) Screen
5
2
12
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA or VCR.
1
2
3
4
Note:
• The Menu mode is canceled if UP/DOWN,
1 2 3 4
DISPLAY, or MENU are not pressed within
, , ,
5 minutes when Self Demo mode is off.
• The Menu mode is canceled if UP/DOWN,
DISPLAY, or MENU are not pressed within
30 seconds when Self Demo mode is on.
1
2
3
4
5
6
7
8
Press MENU for MENU mode.
The CAMERA or VCR MENU screen (see below
left) appears when Menu mode is entered.
Press UP or DOWN to highlight the
desired menu item.
Press DISPLAY to set selection.
Press MENU to exit.
PROGRAMMED REC (page 18).
Camcorder starts and stops recording at a
preset time.
DISPLAY (page 29).
ON : On-screen Display (OSD) screens are
displayed.
SHUTTER (page 24).
Select desired shutter speed.
STAND-BY RELEASE (page 17).
ON : Enables quick resumption of recording
from Stand-by mode.
CLOCK SET (pages 13, 14).
Select to set clock.
LIGHT MODE (page 15).
ON/OFF : Light can be set ON or OFF.
ON/OFF/AUTO : Light can be set ON, OFF, or AUTO.
MOTIONSENSOR (page 28).
ON : Enables MotionSensor recording.
VIDEO EFFECTS (pages 25~26).
AUTO FADE : BLACK or WHITE
DIGITAL FADE : TYPE
COLOR
7 types
8 colors