English
10
Charging your Philips Sonicare
Using your Philips Sonicare
Brushing instructions
35_021_1518_1_Booklet_Lux_A6_v1.indd 10
Note: It is normal to see a slight gap between the
brush head and the handle.
1
Plug the charger into an electrical outlet.
2 Place charging glass (select models) on top of
the charging base and place handle in glass.
- The charge indicator flashes green until
fully charged.
- Rapid yellow flashing indicates charge is
extremely low (fewer than 3 uses left).
Note: It takes at least 24 hours to fully charge
the battery.
This charger is designed to properly charge
only one handle at a time. This charger is not
compatible with other models of Sonicare.
1 Wet the bristles.
03/05/16 08:05