Using The Monitor Set; Connecting To A Pc; D-Sub Connection - HP V192B.BHP Manual

USING THE MONITOR SET
Connecting to a PC
Your Monitor set supports Plug & Play*.
y y
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
D-SUB
RGB OUT
PC
NOTE
When using a D-Sub signal input cable
y y
connector for Macintosh
Mac adapter
y y
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.

USING THE MONITOR SET

CAUTION
Connect the signal input cable
y y
and tighten it by turning the
screws clockwise.
Do not press the screen with
y y
your finger for a long time as this may
result in temporary distortion on the screen.
Avoid displaying a fixed image on the
y y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Self Image Setting Function
Press the power button on the bottom panel to
turn the power on. When monitor power is turned
on, the "Self Image Setting" Function is executed
automatically. (Only supported in Analog Mode)
NOTE
"Self Image Setting" Function.
y y
This function provides the user with optimal
display settings.When the user connects
the monitor for the first time, this function
automatically adjusts the display to optimal
settings for individual input signals.(Only
supported in Analog Mode)
'AUTO' Function.
y y
When you encounter problems such as
blurry screen, blurred letters, screen flicker
or tilted screen while using the device or
after changing screen resolution, press the
AUTO function button to improve resolution.
(Only supported in Analog Mode)
11