Xerox VersaLink C70 Series User Manual page 262

Troubleshooting
4. To remove any jammed staples, pull them in the direction shown.
WARNING:
carefully.
5. Hold the tabs on both sides of the staple cartridge, then reinsert the staple cartridge into the
original position in the finisher.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both
staple cartridges contain staples.
6. Repeat the procedure for the other staple cartridge.
7. Close the finisher side cover.
262 Xerox ® VersaLink
User Guide
The points of the jammed staples are sharp. Remove the jammed staples
® C70XX Color Multifunction Printer