Table of Contents
Advertisement
C
USTOM PAGE SIZE
This feature enables printing on non-standard sized print media.
The multipurpose tray is used for feeding non-standard media sizes. Print media width can
be from approximately 64mm to 216mm, and its length can be from 127mm to 355.6mm.
Actual limits vary slightly depending on which printer driver you use and your computer's
operating system.
Some applications software may not produce the desired results with non-standard print
media sizes, and some experimentation may be required to obtain the results you want.
W
P
S
INDOWS
OST
CRIPT
1.
In the driver's Layout tab, click Advanced.
2.
In the Advanced Options window, under Paper/Output, choose PostScript
Custom Page Size from the Paper Size drop-down list.
3.
In the PostScript Custom Page Size Definition window,
Choose your paper feed direction from the drop-
down list.
The available choices are:
Short edge
The page is portrait (tall) format and you will
first
feed the top of the page into the printer.
Long edge
The page is landscape (wide) format and you
first
will feed the top of the page into the printer.
Short edge
The page is portrait (tall) format and you will
first flipped
feed the bottom of the page into the printer.
Long edge
The page is landscape (wide) format and you
first flipped
will feed the bottom of the page into the printer.
Notice that the size ranges available swap places when you change the paper feed
direction between a portrait and a landscape choice.
Remember that the width of the multipurpose tray is limited to the width of an A3
sheet (297mm), so if your paper is longer than this you will have to feed it short edge
first.
Finishing options > 33
Advertisement
Table of Contents
