Table of Contents
Advertisement
Optional connections:
•
Route audio to other devices:
•
Digital amplifier/receiver
•
Analog stereo system
•
USB flash drive
Note
•
Refer to the type plate at the back or bottom of the
product for identification and supply ratings.
•
Before you make or change any connections, ensure that
all the devices are disconnected from the power outlet.
Connect audio/video cables
Select the best video connection that TV can
support.
•
Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
•
Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan
TV).
•
Option 3: Connect to the composite video
jack (for a standard TV).
Note
•
You must connect this product directly to a TV.
Option 1: Connect to the HDMI jack
HDMI OUT
1
Connect an HDMI cable (not supplied) to
•
the
HDMI OUT jack on this product.
•
the HDMI input jack on the TV.
Note
•
If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see "Get
started" > "Use Philips EasyLink").
HDMI IN
Option 2: Connect to the component
video jack
Y
Pb
Pr
Y
Pr
COMPONENT VIDEO OUT
1
Connect the component video cables (not
supplied) to:
•
the
Y Pb Pr jacks on this product.
•
the COMPONENT VIDEO input jacks
on the TV.
2
Connect the audio cables (supplied) to:
•
the
AUDIO OUT L/R jacks on this
product.
•
the audio input jacks on the TV.
Option 3: Connect to the video (CVBS)
jack
VIDEO IN
1
Connect a composite video cable (supplied)
to:
•
the
TV OUT jack on this product.
•
the video input jack on the TV.
2
Connect the audio cables (supplied) to:
•
the
AUDIO OUT L/R jacks on this
product.
•
the audio input jacks on the TV.
Route audio to other devices
Route the audio from this product to other devices
to enhance audio play.
EN
7
Advertisement
Table of Contents
