Philips HTS5131/51 User Manual page 36

When you switch on the TV, the home theater
automatically switches on.
•
This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch
off EasyLink.
Cannot access BD-Live features.
•
Make sure that the home theater is
connected to the network. Use a
wired network connection (see 'Wired
connection' on page 14) or wireless
network connection (see 'Wireless
connection' on page 15).
•
Make sure that the network is set up. Use
a wired network installation (see 'Set up
the wired network' on page 14) or wireless
network installation (see 'Set up the
wireless network' on page 15).
•
Make sure that the Blu-ray disc supports
BD-Live features.
•
Clear memory storage (see 'Clear memory'
on page 18).
Cannot play video or photos from an iPod or
iPhone on the TV.
•
Browse and select videos and photos from
the iPod or iPhone screen, and play them
on your TV.
•
Make sure that the iPod or iPhone software
has not been tampered with or illegally
modified.
Cannot view pictures from an iPod or iPhone on
the TV.
•
Connect a yellow composite cable to the
iPod dock and the TV.
•
Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite
cable).
•
Press the play button on the iPod or iPhone
to start a slideshow.
•
Make sure that the iPod or iPhone software
has not been tampered with or illegally
modified.
TV screen is black when you play a Blu-ray 3D
video or a DivX copy protected video.
•
Make sure that the home theater is
connected to the TV through an HDMI
cable.
•
Switch to the correct HDMI source on the
TV.
EN
36
Network
Wireless network distorted or not found.
•
Make sure that the wireless network is
not disturbed by microwave ovens, DECT
phones, or other neighboring Wi-Fi devices.
•
Place the wireless router and the home
theater within five meters of each other.
•
Use a USB extension cable to connect the
Wi-Fi dongle to the home theater.
•
If the wireless network does not work
properly, try a wired network installation
(see 'Set up the wired network' on page
14).