Panasonic ES8243AA Operating Instructions Manual page 6

Cleaning
6
We recommend that you clean
your shaver with the "sonic"
vibration turbo-cleaning mode
when the faucet symbol
appears on the LCD panel.
1. Disconnect the power cord
from the shaver.
2. Apply some hand soap and
some water to the outer foil.
3. Press the OFF/ON switch for
more than 2 seconds to
activate the turbo mode for
"sonic" vibration cleaning.
appears on the LCD
•
panel.
After about 20 seconds, it
•
will be automatically turned
off, or you can turn it off by
pressing the OFF/ON switch.
4. Remove the system outer foil
and press the OFF/ON switch
for more than 2 seconds to
activate the turbo mode for
"sonic" vibration cleaning and
clean it with running water.
5. Wipe off any drops of water
with a dry cloth.
6. Dry the system outer foil and
the shaver completely.
Caution for turbo mode
Shaving in turbo mode may damage your skin. Turn the shaver
•
off and then on again to cancel turbo mode.
Do not place your fingers on the OFF/ON switch while using
•
the shaver. This may cause the shaver to turn off or enter turbo
mode. Place your fingers on the finger rest while using the
shaver.