Philips Xenium CT9A9UWHT/00 Manual page 38

Before diverting your calls to your voice mailbox, you
must enter your voice mailbox number. This feature
is subscription dependent.
Call Barring
Allows you to limit the use of your phone to specific
calls. This can be applied to
International Calls International Except
or
Incoming Calls (All Calls
or to
Cancel All
both cases, option applies to all calls at once.
Change Barring PW
allows you to change the call
Status
barring password.
or not a particular type of call has been barred.
This feature is network dependent and requires a
specific call barring password supplied by your service
provider.
Call Time Reminder
This menu allows you to set whether or not the phone
will emit a beep tone after a certain call duration. You
Off
can select (does not emit a beep tone),
(select a value from 1 to 3000 seconds, which is the
duration after which the phone will emit a beep tone)
Periodic
or (select a value from 30 to 60 seconds,
which is the periodic time after which the phone will
emit a beep tone. The phone will emit a beep tone
after each periodic time during a call).
Settings
Outgoing Calls (All Calls,
Home) and/
When Roaming). In
or
allows you to check whether
Single
Call Time Display
This menu allows you to set whether or not to display
the call time during a call.
Auto Redial
If the call you have dialled is not answered, your
phone will automatically redial this number at
intervals. Press ) or R to cancel auto redial.
Closed User Group
This menu is a network dependent service which
allows you to define a group of users within which
outgoing and incoming call restrictions can be made
by the network (for example only calls to numbers
within the group are possible). The same group of
users is then permitted to communicate with each
other but not with users outside the group. Select
Closed User Group and press L Add, then you can
press L Options to Edit, Add, Activate, Deactivate,
Delete
the user group.
IP Number
This menu allows you to store 3 groups of IP number
so that you need not enter the number before you
make an IP call. Press L
IP Number.
Option Activate Edit
to or the
37