LG G122C SR2 Owner's Manual page 11

Vertical Airflow Direction Control
The up/down airflow (Vertical Airflow) can be adjusted
by using the remote control.
1. Press the Start/Stop button to start the unit.
2. Press Chaos Swing button and the louvers will swing
up and down. Press the Chaos Swing button again
to set the vertical louver at the desired airflow
direction.
Horizontal Airflow Direction Control
• Adjust the horizontal airflow direction by manually moving the
horizontal airflow direction louver by hand.
Forced Operation
Operation procedures when the remote control can't be used.
The operation will be started if the power button is pressed.
If you want to stop operation, re-press the button.
Cooling
Model Room Temp. ≥ 24°C 21°C ≤ Room Temp. < 24°C Room Temp. < 21°C
Cooling
Operating mode
High
Indoor FAN Speed
Setting Temperature
22°C
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, open the front panel upward and Press the power button let it be pressed
for about 3 seconds.
If you want to stop the operation, re-press the button.
Heat pump Model
Cooling
Healthy Dehumidification
High
High
22°C 23°C
NOTICE
If you press the CHAOS swing button, the
horizontal airflow direction is changed
automatically based on the CHAOS algorithm to
distribute the air in the room evenly and at the
same time to make the human body feel most
comfortable, as if enjoying a natural breeze.
Always use the remote control to adjust the
up/down airflow direction. Manually moving the
vertical airflow direction louver by hand, could
damage the air conditioner.
When the unit is shut off, the up/down airflow
direction louver will close the air outlet vent of the
system.
Heating
High
24°C
Operating Instructions
Power
button
Open the front
panel upward
Owner's Manual 11