Table of Contents
Advertisement
2
Select [Preferences] > [Version Info], and
then press OK.
3
Write down the file name, and then press
SETUP to exit the menu.
4
Visit www.philips.com/support to check for
the latest software version according to the
file name for this product.
5
Download the software file into a USB flash
drive:
1)
Unzip the file.
2)
Put the unzipped in the root directory.
6
Insert the USB flash drive into the
the product.
•
Make sure that this product is in the USB
mode.
7
Refer to the on-screen instructions for more
information.
Note
•
Disconnect the power cord for a few seconds and
connect again to turn on the product.
Care
Caution
•
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
Note
•
Specification and design are subject to change without
notice
USB
•
Compatibility: Hi-Speed USB (2.0)
•
Class support: UMS (USB Mass Storage Class)
Video
•
Signal system: PAL / NTSC
•
Composite video output: 1 Vpp ~ 75 ohm
•
Component video output: 0.7 Vpp ~ 75 ohm
•
HDMI output: 480i, 480p, 576i, 576p, 720p,
1080i, 1080p
20
EN
Audio
•
Analog stereo output
•
Signal to noise ratio (1 kHz): > 90 dB
(A-weighted)
•
Dynamic Range (1 kHz): > 80 dB (A-weighted)
•
Crosstalk (1 kHz): > 90 dB
•
Distortion/noise: (1 kHz): > 75 dB
•
MPEG MP3: MPEG Audio L3
•
Digital output
•
•
HDMI output
Main unit
•
Dimensions (w x h x d): 360 x 39 x 209 (mm)
jack of
•
Net Weight: 1.47 kg
Power
•
Power supply rating: 230V, 50HZ
•
Power consumption: <10 W
•
Power consumption in standby mode: <1 W
Accessories supplied
•
Remote control and batteries
•
Audio/Video cables
•
User Manual
Laser specification
•
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
•
Wave length: 658 nm (DVD), 790 nm (CD)
•
Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
•
Beam divergence: 60 degrees
9 Troubleshooting
•
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model
and serial number of your product. The model
number and serial number are on the back of your
product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Coaxial
Warning
Advertisement
Table of Contents
