4
When the device is off, immediately press and release OK to save
the code. The red LED indicator will turn off.
max. 20
minutes
5
Operate the device with the universal remote. If your device
responds correctly, it means you have saved the right code.
Note
•
Auto registration can be reversed, by pressing and releasing
auto registration process. This is helpful if you missed out the chance to press OK
within 2 seconds. Make sure that the device is first powered on again.
•
Repeat the same procedures to set up other devices.
•
It is possible sometimes that your device only responds to some of the buttons. In
such case, set up with the next code in the code list, and try operating your device
again.
8
EN
once more during the