Table of Contents
Advertisement
Making Copies
This section describes the procedure to copy with Standard copy.
1.
Make sure printer is turned on.
2.
Load paper.
3. Select
Copy on the HOME screen.
Using the Operation Panel
4. Select
Standard copy.
The Copy standby screen is displayed.
5.
Load original document on platen glass or in ADF.
6. Specify settings as necessary.
A. The scanning method and copy layout are displayed.
Switch the scanning method from the ADF and layout (single-sided/two-sided).
B. Specifies the number of copies.
234
Advertisement
Table of Contents
